Skip to content

Change Log

Release 24.10

Release date: 31-Oct-2024

  • PID indicator data (value, shift and error) are enabled and displayed in the PID/PLL tab of LabOne UI.
  • PID indicator data (value, shift and error) can be streamed to the host computer. This can be controlled in the PID/PLL tab of LabOne UI.
  • PID indicator data (value, shift and error) are available on Aux Outputs and can be selected in Aux tab of LabOne UI.
  • Enabled the PID Advisor tool to simulate the behavior of a number of different DUT types in a feedback loop and choose feedback gain parameters based on the simulation.
  • Enabled subscription to PID signals (value, shift and error) in the LabOne Sweeper module and Sweeper tab of LabOne UI.
  • Consistent spectral measurement across Sweeper, Scope, Data Acquisition, and Spectrum tools.

Release 24.07

Release date: 31-Jul-2024

  • Connected the Auxiliary Input channels to the Scope module to capture the digitized signals.
  • Connected the Auxiliary Input channels to the Demodulators and enabled them for external reference.
  • Added input range control for Auxiliary Inputs.
  • Added input range utilization reporting for Signal Inputs and Auxiliary Inputs.
  • Added user-configurable delay compensation for demodulated signals from Signals Inputs and Auxiliary Inputs.
  • Oscilloscope: The Scope module of LabOne offers now Uniform averaging in addition to already available Exponential averaging.

Release 24.04

Release date: 30-Apr-2024

  • GHF-MOD Modulation Analysis option that introduces two modulation units for sideband analysis is enabled.

Release 24.01

Release date: 31-Jan-2024

  • DAQ module can acquire and analyze hardware-triggered demodulator data.
  • Demodulator metadata provides information on frequencies and sources.
  • Demodulator frequencies are included in the LabOne UI analysis tools.
  • Bypassing the demodulator LPF is available in the LabOne UI.
  • Demodulator input selectors are independent from the multi-frequency (MF) option.

Release 23.10

Release date: 31-Oct-2023

  • GHF-PID Quad PID/PLL Controller Option is enabled.
  • External reference (ExtRef) feature allowing the user to lock an oscillator to an external signal's frequency.
  • Amplitude (R) and Phase (Theta) of the demodulated signals are now available at the Auxiliary Outputs.
  • Demodulator data acquisition can be triggered via Trigger Inputs.
  • Connectivity: Ethernet-over-USB on the USB 2 interface.
  • Sweeper: Setting the start and stop points of the sweep parameter from the x-axis cursors in the Sweeper tab.

Release 23.06

Release date: 30-Jun-2023

  • Initial release of the GHFLI User Manual.